Contact
Removable Direct Thermal Labels
Home / Labels / Removable Direct Thermal Labels
Blank white labels for parts bins, shelves and metal parts. They print on a direct thermal printer with no ribbon or ink, and the removable adhesive lets you peel one off and relabel when a bin or part changes.
- 2.25 x 1.25 in with rounded corners
- 1,000 labels per roll on a 1 in core
- Removable adhesive, direct thermal (no ribbon)
- Made in the USA, Saint Marys, KS
Specifications
| Label size | 2.25 in wide x 1.25 in tall (57.2 x 31.8 mm), 0.125 in rounded corners |
| Labels per roll | 1,000, one across, perforated between labels, shrink-wrapped |
| Core | 1 in inside diameter |
| Roll diameter | About 3.2 in |
| Face stock | White direct thermal paper, 2.9 mil |
| Adhesive | Removable |
| Liner | 40 lb kraft, 2.4 mil |
| Total thickness | 5.3 mil |
| Print method | Direct thermal (heat-sensitive face, no ribbon or ink). Not for thermal transfer ribbon printing. |
| Printer fit | Check that your printer takes a 2.25 in label width and 1 in cores before you order. |
Where it works
Good to know
| Will it come off cleanly? | It uses a removable adhesive built to peel off, but results depend on the surface, temperature and how long the label stays on. Test a few labels on your own parts before a bulk order. |
| Does it fade? | Direct thermal faces darken with heat, sunlight and some chemicals, so this is best for indoor use and short-to-medium storage. |
| Need permanent instead? | See our permanent 2-1/4" x 1-1/4" direct thermal labels. |
| Other sizes? | Ask about custom sizes, colors and pre-printed versions. |
Specifications are from our production records; sizes are nominal. Product not yet listed; details may change before launch.
